Volvo C30 2.4 TD - 180-BHP - 134-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 180 | 225 | 248 |
| (Nm) | 350 | 400 | 440 |
Volvo C30 2.4 TD - 180-BHP - 134-KW chiptuning ve Stage 1 ECU remap
Volvo C30 2.4 TD - 180-BHP - 134-KW 01/2009 - 01/2012 icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 180 HP'den 225 HP'ye, 350 Nm'den 400 Nm'ye.
| : cars |
| : Volvo |
| : (01/2009 - 01/2012) |
| : C30 |
| : Diesel |
| : 2.4 TD - 180-BHP - 134-KW |
| : D5244T8 |
| : BOSCH EDC16C31 |
| : Opens both sides, board flip |
| : Above pedals |
| OBD: ENU_MO_0172 |
| KESSV2: OBD |
| Kess V2 Protocollo: 172 |
| Kess V2 Aiuto: ENU_L_EDC16 |
| Protocollo KTAG: 68 |
| KTAG Aiuto: ENU_L_EDC16 |
| Processore KTAG: Bdm(MPC5xx) |
| AUTOTUNER: Not yet supported - Check tool |
| X17: OBD/Boot |
| CMD: OBD/Boot |
| DPF: YES | EGR: YES |
| ADBLUE: NO | TVA: YES |
| HOT START: NO | SAP: NO |
| DTC: YES | EVAP: NO |
| HARDCUT: NO | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: NO |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: YES |
| LAUNCH CONTROL: NO |
1
On OBD access to ECU is required to program. Easiest to use Volvo cable
2
A canbus Uxxxx code can be displayed on the scantool after the remap relating to "Internal Control Module Software Incompatibility/Control Module, faulty software checksum ECM". Unfortunately there is no fix for this. This will not trigger a mil code nor trigger limp mode, its a background code to mark to Volvo the ECU has been remapped.