Volkswagen Beetle Cabriolet 2.0 - 115-BHP - 86-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 115 | 124 | 136 |
| (Nm) | 170 | 183 | 201 |
Volkswagen Beetle Cabriolet 2.0 - 115-BHP - 86-KW chiptuning ve Stage 1 ECU remap
Volkswagen Beetle Cabriolet 2.0 - 115-BHP - 86-KW 01/2005 - 01/2011 icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 115 HP'den 124 HP'ye, 170 Nm'den 183 Nm'ye.
Volkswagen Beetle Cabriolet 2.0 - 115-BHP - 86-KW hakkinda sik sorulan sorular
Volkswagen Beetle Cabriolet 2.0 - 115-BHP - 86-KW Stage 1 sonrasi kac HP ve Nm olur?
Stage 1 115 HP'den 124 HP'ye, 170 Nm'den 183 Nm'ye. Nihai degerler arac sagligi, yakit ve olcum kosullarina gore degisebilir.
Volkswagen Beetle Cabriolet 2.0 - 115-BHP - 86-KW hangi ECU ile calisir?
Volkswagen Beetle Cabriolet 2.0 - 115-BHP - 86-KW icin kayitli motor kontrol unitesi BOSCH ME7.X4Mbit olarak gorunmektedir.
Chiptuning uygulamasi oncesinde hangi kontroller yapilir?
Ariza kayitlari, mekanik durum ve ECU bilgisi kontrol edilir; uygun kalibrasyon arac bazinda belirlenir.
| : cars |
| : Volkswagen |
| : (01/2005 - 01/2011) |
| : Beetle Cabriolet |
| : Petrol |
| : 2.0 - 115-BHP - 86-KW |
| : BDC |
| : BOSCH ME7.X4Mbit |
| : Above pedals |
| OBD: ENU_094300CAN1 |
| KESSV2: OBD |
| Kess V2 Protocollo: 38 |
| Protocollo KTAG: 48 |
| Processore KTAG: Boot(ST) |
| AUTOTUNER: Not yet supported - Check tool |
| X17: OBD Only |
| CMD: OBD Only |
| DPF: NO | EGR: NO |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: YES |
| DTC: YES | EVAP: NO |
| HARDCUT: NO | POP & BANG: YES |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: YES |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: YES |
If Kess Family 38 does not work, try protocol 56
If vehicle wont read try removing dashboard fuse 11 in driver's door panel. Early throttle cable cars are chip change only