Vauxhall Meriva 1.3 CDTI - 95-BHP - 71-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 95 | 115 | 127 |
| (Nm) | 190 | 240 | 264 |
Vauxhall Meriva 1.3 CDTI - 95-BHP - 71-KW chiptuning ve Stage 1 ECU remap
Vauxhall Meriva 1.3 CDTI - 95-BHP - 71-KW 01/2010 - 01/2013 icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 95 HP'den 115 HP'ye, 190 Nm'den 240 Nm'ye.
Vauxhall Meriva 1.3 CDTI - 95-BHP - 71-KW hakkinda sik sorulan sorular
Vauxhall Meriva 1.3 CDTI - 95-BHP - 71-KW Stage 1 sonrasi kac HP ve Nm olur?
Stage 1 95 HP'den 115 HP'ye, 190 Nm'den 240 Nm'ye. Nihai degerler arac sagligi, yakit ve olcum kosullarina gore degisebilir.
Vauxhall Meriva 1.3 CDTI - 95-BHP - 71-KW hangi ECU ile calisir?
Vauxhall Meriva 1.3 CDTI - 95-BHP - 71-KW icin kayitli motor kontrol unitesi BOSCH EDC17C59 olarak gorunmektedir.
Chiptuning uygulamasi oncesinde hangi kontroller yapilir?
Ariza kayitlari, mekanik durum ve ECU bilgisi kontrol edilir; uygun kalibrasyon arac bazinda belirlenir.
| : cars |
| : Vauxhall |
| : (01/2010 - 01/2013) |
| : Meriva |
| : Diesel |
| : 1.3 CDTI - 95-BHP - 71-KW |
| : A13DTE |
| : BOSCH EDC17C59 |
| : Behind light panel, near gear stick |
| KESSV2: Not yet supported - Check tool |
| Kess V2 Aiuto: ENU_L_EDC17_OPEL_GPT |
| Protocollo KTAG: 688 |
| KTAG Aiuto: ENU_L_EDC17_OPEL_GPT |
| Processore KTAG: Boot(Tricore) |
| AUTOTUNER: Boot Only |
| X17: Boot Only |
| CMD: Boot Only |
| DPF: YES | EGR: YES |
| ADBLUE: NO | TVA: YES |
| HOT START: NO | SAP: NO |
| DTC: YES | EVAP: NO |
| HARDCUT: YES | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: YES | SPEED LIMIT: YES |
| START STOP: YES | LAMBDA: NO |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
This ECU can now be pinned onto the ECU terminals with KTAG & Autotuner. Old bench read requires 2 x 470 ohms resistors and 7 boot pins required.
K-TAG Read only for DPF/EGR OFF