Skoda Superb 2.0 TDI - 140-BHP - 104-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 140 | 180 | 198 |
| (Nm) | 320 | 400 | 440 |
Skoda Superb 2.0 TDI - 140-BHP - 104-KW chiptuning ve Stage 1 ECU remap
Skoda Superb 2.0 TDI - 140-BHP - 104-KW 01/2002 - 01/2006 icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 140 HP'den 180 HP'ye, 320 Nm'den 400 Nm'ye.
Skoda Superb 2.0 TDI - 140-BHP - 104-KW hakkinda sik sorulan sorular
Skoda Superb 2.0 TDI - 140-BHP - 104-KW Stage 1 sonrasi kac HP ve Nm olur?
Stage 1 140 HP'den 180 HP'ye, 320 Nm'den 400 Nm'ye. Nihai degerler arac sagligi, yakit ve olcum kosullarina gore degisebilir.
Skoda Superb 2.0 TDI - 140-BHP - 104-KW hangi ECU ile calisir?
Skoda Superb 2.0 TDI - 140-BHP - 104-KW icin kayitli motor kontrol unitesi BOSCH EDC16 olarak gorunmektedir.
Chiptuning uygulamasi oncesinde hangi kontroller yapilir?
Ariza kayitlari, mekanik durum ve ECU bilgisi kontrol edilir; uygun kalibrasyon arac bazinda belirlenir.
| : cars |
| : Skoda |
| : (01/2002 - 01/2006) |
| : Superb |
| : Diesel |
| : 2.0 TDI - 140-BHP - 104-KW |
| : BSS |
| : BOSCH EDC16 |
| : Opens one side |
| : Behind panel, side of steering wheel |
| OBD: ENU_MO_0062 |
| KESSV2: OBD |
| Kess V2 Protocollo: 62 |
| Kess V2 Aiuto: ENU_L_EDC16 |
| KTAG Aiuto: ENU_L_EDC16 |
| Processore KTAG: Bdm(MPC5xx) |
| AUTOTUNER: Not yet supported - Check tool |
| X17: Not yet supported - Check tool |
| CMD: Not yet supported - Check tool |
| DPF: YES | EGR: YES |
| ADBLUE: NO | TVA: YES |
| HOT START: NO | SAP: NO |
| DTC: YES | EVAP: NO |
| HARDCUT: YES | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: NO |
| MAF: YES | BOOST SENSOR: YES |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
1
On K-TAG take special care to align probes correctly, otherwise will damage ECU