SEAT Altea XL 2.0 TDI - 140-BHP - 104-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 140 | 180 | 198 |
| (Nm) | 320 | 400 | 440 |
SEAT Altea XL 2.0 TDI - 140-BHP - 104-KW chiptuning ve Stage 1 ECU remap
SEAT Altea XL 2.0 TDI - 140-BHP - 104-KW 01/2006 - 01/2009 icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 140 HP'den 180 HP'ye, 320 Nm'den 400 Nm'ye.
| : cars |
| : SEAT |
| : (01/2006 - 01/2009) |
| : Altea XL |
| : Diesel |
| : 2.0 TDI - 140-BHP - 104-KW |
| : AZV |
| : BOSCH EDC16U |
| : Sealed all around, remove one side |
| : Behind panel, side of steering wheel |
| OBD: ENU_MO_0062 |
| KESSV2: OBD |
| Kess V2 Protocollo: 62 |
| Kess V2 Aiuto: ENU_L_EDC16 |
| Protocollo KTAG: 2 |
| KTAG Aiuto: ENU_L_EDC16 |
| Processore KTAG: Bdm(MPC5xx) |
| AUTOTUNER: Not yet supported - Check tool |
| X17: OBD/Boot |
| CMD: OBD/Boot |
| DPF: YES | EGR: YES |
| ADBLUE: NO | TVA: YES |
| HOT START: YES | SAP: NO |
| DTC: YES | EVAP: NO |
| HARDCUT: YES | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: NO |
| MAF: YES | BOOST SENSOR: YES |
| SPORT DISPLAY: NO | SWIRL FLAP: YES |
| LAUNCH CONTROL: YES |
1
On K-TAG take special care to align probes correctly, otherwise will damage ECU
2
If not reading on Kline, try changing speed to minimum in Setup menu