Renault Laguna 2.0 - 140-BHP - 104-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 140 | 154 | 169 |
| (Nm) | 190 | 209 | 230 |
Renault Laguna 2.0 - 140-BHP - 104-KW chiptuning ve Stage 1 ECU remap
Renault Laguna 2.0 - 140-BHP - 104-KW 01/2009 - 01/2010 icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 140 HP'den 154 HP'ye, 190 Nm'den 209 Nm'ye.
| : cars |
| : Renault |
| : (01/2009 - 01/2010) |
| : Laguna |
| : Petrol |
| : 2.0 - 140-BHP - 104-KW |
| : M4R |
| : SAGEM S3000 |
| : Sealed all around, remove one side select |
| : Centre console, next to 12V port |
| OBD: ENU_MO_0090 |
| KESSV2: OBD |
| Kess V2 Protocollo: 90 |
| Kess V2 Aiuto: ENU_L_0250 |
| Protocollo KTAG: 250 |
| KTAG Aiuto: ENU_L_0250 |
| Processore KTAG: Jtag(Renesas) |
| AUTOTUNER: Not yet supported - Check tool |
| X17: OBD Only |
| CMD: OBD Only |
| DPF: NO | EGR: NO |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: NO | EVAP: NO |
| HARDCUT: NO | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: YES |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
1
Clean surface of probe points well, if not reading/writing clean again
2
On keyless, put card in slot, into first gear and push button for 10 seconds until 'Remove card' comes up on dash