Peugeot Bipper Tepee 1.3 HDi - 75-BHP - 56-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 75 | 95 | 105 |
| (Nm) | 190 | 238 | 262 |
Peugeot Bipper Tepee 1.3 HDi - 75-BHP - 56-KW chiptuning ve Stage 1 ECU remap
Peugeot Bipper Tepee 1.3 HDi - 75-BHP - 56-KW 01/2009 - 01/2014 icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 75 HP'den 95 HP'ye, 190 Nm'den 238 Nm'ye.
Peugeot Bipper Tepee 1.3 HDi - 75-BHP - 56-KW hakkinda sik sorulan sorular
Peugeot Bipper Tepee 1.3 HDi - 75-BHP - 56-KW Stage 1 sonrasi kac HP ve Nm olur?
Stage 1 75 HP'den 95 HP'ye, 190 Nm'den 238 Nm'ye. Nihai degerler arac sagligi, yakit ve olcum kosullarina gore degisebilir.
Peugeot Bipper Tepee 1.3 HDi - 75-BHP - 56-KW hangi ECU ile calisir?
Peugeot Bipper Tepee 1.3 HDi - 75-BHP - 56-KW icin kayitli motor kontrol unitesi MAGNETI MARELLI MJ8DF olarak gorunmektedir.
Chiptuning uygulamasi oncesinde hangi kontroller yapilir?
Ariza kayitlari, mekanik durum ve ECU bilgisi kontrol edilir; uygun kalibrasyon arac bazinda belirlenir.
| : cars |
| : Peugeot |
| : (01/2009 - 01/2014) |
| : Bipper Tepee |
| : Diesel |
| : 1.3 HDi - 75-BHP - 56-KW |
| : FHZ(F13DTE5) |
| : MAGNETI MARELLI MJ8DF |
| : Behind panel, side of steering wheel |
| OBD: ENU_MO_0293 |
| KESSV2: OBD - VR/ID Only |
| Kess V2 Protocollo: 293 |
| Kess V2 Aiuto: ENU_L_0303 |
| KTAG Aiuto: ENU_L_0303 |
| Processore KTAG: Jtag(Nexus) |
| AUTOTUNER: Not yet supported - Check tool |
| X17: Not yet supported - Check tool |
| CMD: OBD/Boot/Bench |
| DPF: YES | EGR: YES |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: YES | EVAP: NO |
| HARDCUT: NO | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: NO |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
Requires K-TAG read to obtain correct original file if Alientech do not have it on database
On K-TAG, lids will be damaged on opening