Mazda 6 2.2 MZR-CD - 185-BHP - 138-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 185 | 215 | 237 |
| (Nm) | 400 | 450 | 495 |
Mazda 6 2.2 MZR-CD - 185-BHP - 138-KW chiptuning ve Stage 1 ECU remap
Mazda 6 2.2 MZR-CD - 185-BHP - 138-KW 01/2008 - 01/2010 icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 185 HP'den 215 HP'ye, 400 Nm'den 450 Nm'ye.
Mazda 6 2.2 MZR-CD - 185-BHP - 138-KW hakkinda sik sorulan sorular
Mazda 6 2.2 MZR-CD - 185-BHP - 138-KW Stage 1 sonrasi kac HP ve Nm olur?
Stage 1 185 HP'den 215 HP'ye, 400 Nm'den 450 Nm'ye. Nihai degerler arac sagligi, yakit ve olcum kosullarina gore degisebilir.
Mazda 6 2.2 MZR-CD - 185-BHP - 138-KW hangi ECU ile calisir?
Mazda 6 2.2 MZR-CD - 185-BHP - 138-KW icin kayitli motor kontrol unitesi DENSO R2AB olarak gorunmektedir.
Chiptuning uygulamasi oncesinde hangi kontroller yapilir?
Ariza kayitlari, mekanik durum ve ECU bilgisi kontrol edilir; uygun kalibrasyon arac bazinda belirlenir.
| : cars |
| : Mazda |
| : (01/2008 - 01/2010) |
| : 6 |
| : Diesel |
| : 2.2 MZR-CD - 185-BHP - 138-KW |
| : R2 |
| : DENSO R2AB |
| : Sealed all around, remove one side |
| : Above pedals |
| OBD: ENU_MO_0314 |
| KESSV2: OBD |
| Kess V2 Protocollo: 314 |
| Kess V2 Aiuto: ENU_L_0327 |
| Protocollo KTAG: 327 |
| KTAG Aiuto: ENU_L_0327 |
| Processore KTAG: Jtag(Renesas) |
| AUTOTUNER: Not yet supported - Check tool |
| X17: Not yet supported. Check tool |
| CMD: OBD/Boot/Bench |
| DPF: NO | EGR: NO |
| ADBLUE: NO | TVA: YES |
| HOT START: NO | SAP: NO |
| DTC: NO | EVAP: NO |
| HARDCUT: NO | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: NO |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
1
Clean surface of probe points well, if not reading/writing clean again