Holden Vectra 1.9 CDTI - 120-BHP - 89-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 120 | 155 | 171 |
| (Nm) | 280 | 350 | 385 |
Holden Vectra 1.9 CDTI - 120-BHP - 89-KW chiptuning ve Stage 1 ECU remap
Holden Vectra 1.9 CDTI - 120-BHP - 89-KW 01/1988 - 01/2008 icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 120 HP'den 155 HP'ye, 280 Nm'den 350 Nm'ye.
Holden Vectra 1.9 CDTI - 120-BHP - 89-KW hakkinda sik sorulan sorular
Holden Vectra 1.9 CDTI - 120-BHP - 89-KW Stage 1 sonrasi kac HP ve Nm olur?
Stage 1 120 HP'den 155 HP'ye, 280 Nm'den 350 Nm'ye. Nihai degerler arac sagligi, yakit ve olcum kosullarina gore degisebilir.
Holden Vectra 1.9 CDTI - 120-BHP - 89-KW hangi ECU ile calisir?
Holden Vectra 1.9 CDTI - 120-BHP - 89-KW icin kayitli motor kontrol unitesi BOSCH EDC16C9 olarak gorunmektedir.
Chiptuning uygulamasi oncesinde hangi kontroller yapilir?
Ariza kayitlari, mekanik durum ve ECU bilgisi kontrol edilir; uygun kalibrasyon arac bazinda belirlenir.
| : cars |
| : Holden |
| : (01/1988 - 01/2008) |
| : Vectra |
| : Diesel |
| : 1.9 CDTI - 120-BHP - 89-KW |
| : BOSCH EDC16C9 |
| : Next to gear stick, behind panel |
| OBD: ENU_094300CAN1 |
| KESSV2: OBD |
| Kess V2 Protocollo: 68 |
| Kess V2 Aiuto: ENU_L_EDC16 |
| Protocollo KTAG: 7 |
| KTAG Aiuto: ENU_L_EDC16 |
| Processore KTAG: Bdm(MPC5xx) |
| AUTOTUNER: Not yet supported - Check tool |
| X17: Not yet supported - Check tool |
| CMD: Not yet supported - Check tool |
| DPF: YES | EGR: YES |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: YES | EVAP: NO |
| HARDCUT: NO | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: NO |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
Safe OBD2 ID and write - original file nearly always in stock
Software only has one ORG per SW, even with K-Tag