Holden Astra 1.9 CDTI - 150-BHP - 112-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 150 | 190 | 209 |
| (Nm) | 320 | 400 | 440 |
Holden Astra 1.9 CDTI - 150-BHP - 112-KW chiptuning ve Stage 1 ECU remap
Holden Astra 1.9 CDTI - 150-BHP - 112-KW 01/1995 - 01/2009 icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 150 HP'den 190 HP'ye, 320 Nm'den 400 Nm'ye.
Holden Astra 1.9 CDTI - 150-BHP - 112-KW hakkinda sik sorulan sorular
Holden Astra 1.9 CDTI - 150-BHP - 112-KW Stage 1 sonrasi kac HP ve Nm olur?
Stage 1 150 HP'den 190 HP'ye, 320 Nm'den 400 Nm'ye. Nihai degerler arac sagligi, yakit ve olcum kosullarina gore degisebilir.
Holden Astra 1.9 CDTI - 150-BHP - 112-KW hangi ECU ile calisir?
Holden Astra 1.9 CDTI - 150-BHP - 112-KW icin kayitli motor kontrol unitesi BOSCH EDC16C39 olarak gorunmektedir.
Chiptuning uygulamasi oncesinde hangi kontroller yapilir?
Ariza kayitlari, mekanik durum ve ECU bilgisi kontrol edilir; uygun kalibrasyon arac bazinda belirlenir.
| : cars |
| : Holden |
| : (01/1995 - 01/2009) |
| : Astra |
| : Diesel |
| : 1.9 CDTI - 150-BHP - 112-KW |
| : BOSCH EDC16C39 |
| : Behind panel under hand brake |
| OBD: ENU_MO_0106 |
| KESSV2: OBD |
| Kess V2 Protocollo: 106 |
| Kess V2 Aiuto: ENU_L_EDC16 |
| Protocollo KTAG: 74 |
| KTAG Aiuto: ENU_L_EDC16 |
| Processore KTAG: Bdm(MPC5xx) |
| AUTOTUNER: Not yet supported - Check tool |
| X17: Not yet supported - Check tool |
| CMD: Not yet supported - Check tool |
| DPF: YES | EGR: YES |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: YES | EVAP: NO |
| HARDCUT: NO | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: NO |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
K-TAG BDM required for DPF and EGR delete, unless I.D. Only
CMD is virtual read - safe. KESS master and slave only do partial read. May not make power. Can't do DPF from partial. KESS master can write the K-Tag file so can be done from ID match for DPF. KESS slave can only write partial & will fail with K-Tag read