Ford Focus 2.0 TDCi - 136-BHP - 101-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 136 | 180 | 198 |
| (Nm) | 320 | 420 | 462 |
Ford Focus 2.0 TDCi - 136-BHP - 101-KW chiptuning ve Stage 1 ECU remap
Ford Focus 2.0 TDCi - 136-BHP - 101-KW 01/2008 - 01/2011 icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 136 HP'den 180 HP'ye, 320 Nm'den 420 Nm'ye.
| : cars |
| : Ford |
| : (01/2008 - 01/2011) |
| : Focus |
| : Diesel |
| : 2.0 TDCi - 136-BHP - 101-KW |
| : G6DA |
| : SIEMENS SID803A |
| : Sealed all around, remove one side |
| : Side of steering wheel |
| OBD: ENU_MO_0075 |
| KESSV2: OBD |
| Kess V2 Protocollo: 76 |
| Kess V2 Aiuto: ENU_L_SIEMENS_SID803A_PSA |
| Protocollo KTAG: 78 |
| KTAG Aiuto: ENU_L_SIEMENS_SID803A_PSA |
| Processore KTAG: Bdm(MPC5xx) |
| AUTOTUNER: OBD Only |
| X17: OBD Only |
| CMD: OBD/Boot/Bench |
| DPF: YES | EGR: YES |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: YES | EVAP: NO |
| HARDCUT: NO | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: NO |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
1
If BDM adaptors does not read make direct soldered connection
2
If C1956 steering angle fault comes up after programming, you will either after just turn the steering from lock to lock to realign the steering angle sensor or use a diagnostic machine.