Ford Fiesta Vignale 1.0 EcoBoost - 140-BHP - 104-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 140 | 155 | 171 |
| (Nm) | 210 | 257 | 283 |
Ford Fiesta Vignale 1.0 EcoBoost - 140-BHP - 104-KW chiptuning ve Stage 1 ECU remap
Ford Fiesta Vignale 1.0 EcoBoost - 140-BHP - 104-KW 01/2017 - Present icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 140 HP'den 155 HP'ye, 210 Nm'den 257 Nm'ye.
Ford Fiesta Vignale 1.0 EcoBoost - 140-BHP - 104-KW hakkinda sik sorulan sorular
Ford Fiesta Vignale 1.0 EcoBoost - 140-BHP - 104-KW Stage 1 sonrasi kac HP ve Nm olur?
Stage 1 140 HP'den 155 HP'ye, 210 Nm'den 257 Nm'ye. Nihai degerler arac sagligi, yakit ve olcum kosullarina gore degisebilir.
Ford Fiesta Vignale 1.0 EcoBoost - 140-BHP - 104-KW hangi ECU ile calisir?
Ford Fiesta Vignale 1.0 EcoBoost - 140-BHP - 104-KW icin kayitli motor kontrol unitesi BOSCH MED17.0.7 olarak gorunmektedir.
Chiptuning uygulamasi oncesinde hangi kontroller yapilir?
Ariza kayitlari, mekanik durum ve ECU bilgisi kontrol edilir; uygun kalibrasyon arac bazinda belirlenir.
| : cars |
| : Ford |
| : (01/2017 - Present) |
| : Fiesta Vignale |
| : Petrol |
| : 1.0 EcoBoost - 140-BHP - 104-KW |
| : YYJA-YYJB |
| : BOSCH MED17.0.7 |
| : Sealed all around, remove one side |
| : Behind panel, side of steering wheel |
| KESSV2: OBD |
| Kess V2 Protocollo: 709 |
| Protocollo KTAG: 1064 |
| Processore KTAG: Boot(Tricore) |
| AUTOTUNER: OBD/Boot/Bench |
| X17: Boot Only |
| CMD: OBD/Boot/Bench |
| DPF: NO | EGR: NO |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: YES | EVAP: YES |
| HARDCUT: NO | POP & BANG: YES |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: NO |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |