Fiat Qubo 1.3 MJet - 75-BHP - 56-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 75 | 95 | 105 |
| (Nm) | 190 | 242 | 266 |
Fiat Qubo 1.3 MJet - 75-BHP - 56-KW chiptuning ve Stage 1 ECU remap
Fiat Qubo 1.3 MJet - 75-BHP - 56-KW 01/2009 - 01/2016 icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 75 HP'den 95 HP'ye, 190 Nm'den 242 Nm'ye.
Fiat Qubo 1.3 MJet - 75-BHP - 56-KW hakkinda sik sorulan sorular
Fiat Qubo 1.3 MJet - 75-BHP - 56-KW Stage 1 sonrasi kac HP ve Nm olur?
Stage 1 75 HP'den 95 HP'ye, 190 Nm'den 242 Nm'ye. Nihai degerler arac sagligi, yakit ve olcum kosullarina gore degisebilir.
Fiat Qubo 1.3 MJet - 75-BHP - 56-KW hangi ECU ile calisir?
Fiat Qubo 1.3 MJet - 75-BHP - 56-KW icin kayitli motor kontrol unitesi MAGNETI MARELLI MJD6F3 MPC563 olarak gorunmektedir.
Chiptuning uygulamasi oncesinde hangi kontroller yapilir?
Ariza kayitlari, mekanik durum ve ECU bilgisi kontrol edilir; uygun kalibrasyon arac bazinda belirlenir.
| : cars |
| : Fiat |
| : (01/2009 - 01/2016) |
| : Qubo |
| : Diesel |
| : 1.3 MJet - 75-BHP - 56-KW |
| : 199 A2.000 |
| : MAGNETI MARELLI MJD6F3 MPC563 |
| : Sealed all around, remove one side |
| : Behind panel, side of steering wheel |
| OBD: ENU_MO_0082 |
| KESSV2: OBD - VR/ID Only |
| Kess V2 Protocollo: 82 |
| Kess V2 Aiuto: ENU_L_MARELLI_6F3 |
| Protocollo KTAG: 85 |
| KTAG Aiuto: ENU_L_MARELLI_6F3 |
| Processore KTAG: Bdm(MPC5xx) |
| AUTOTUNER: Not yet supported - Check tool |
| X17: OBD Only |
| CMD: OBD/Boot/Bench |
| DPF: YES | EGR: YES |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: YES | EVAP: NO |
| HARDCUT: NO | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: NO |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
On K-TAG lids will be damaged on opening
Requires K-TAG read to obtain correct original file. OBD2 write function can be used once K-TAG read taken