BMW Z3 1.9 - 140-BHP - 104-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 140 | 150 | 165 |
| (Nm) | 180 | 196 | 216 |
BMW Z3 1.9 - 140-BHP - 104-KW chiptuning ve Stage 1 ECU remap
BMW Z3 1.9 - 140-BHP - 104-KW 01/1996 - 01/2003 icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 140 HP'den 150 HP'ye, 180 Nm'den 196 Nm'ye.
BMW Z3 1.9 - 140-BHP - 104-KW hakkinda sik sorulan sorular
BMW Z3 1.9 - 140-BHP - 104-KW Stage 1 sonrasi kac HP ve Nm olur?
Stage 1 140 HP'den 150 HP'ye, 180 Nm'den 196 Nm'ye. Nihai degerler arac sagligi, yakit ve olcum kosullarina gore degisebilir.
BMW Z3 1.9 - 140-BHP - 104-KW hangi ECU ile calisir?
BMW Z3 1.9 - 140-BHP - 104-KW icin kayitli motor kontrol unitesi BOSCH M5.2 olarak gorunmektedir.
Chiptuning uygulamasi oncesinde hangi kontroller yapilir?
Ariza kayitlari, mekanik durum ve ECU bilgisi kontrol edilir; uygun kalibrasyon arac bazinda belirlenir.
| : cars |
| : BMW |
| : (01/1996 - 01/2003) |
| : Z3 |
| : Petrol |
| : 1.9 - 140-BHP - 104-KW |
| : M44B19 |
| : BOSCH M5.2 |
| : In engine bay |
| OBD: ENU_144300K202 |
| KESSV2: OBD |
| Kess V2 Protocollo: 250 |
| Processore KTAG: Not yet supported - Check tool |
| AUTOTUNER: Not yet supported - Check tool |
| X17: Not yet supported - Check tool |
| CMD: Not yet supported - Check tool |
| DPF: NO | EGR: NO |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: NO | EVAP: NO |
| HARDCUT: NO | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: NO |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
If push button ignition please follow these steps. 1. hold button for 4 seconds and release. Dash should illuminate, if it doesn?t press once more. Onnce dash illuminated proceed to read/write. When kess prompts to cycle ignition just ignore and select next. Without doing this will still read but fail on write