BMW X5 3.0 - 272-BHP - 203-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 272 | 282 | 310 |
| (Nm) | 300 | 337 | 371 |
BMW X5 3.0 - 272-BHP - 203-KW chiptuning ve Stage 1 ECU remap
BMW X5 3.0 - 272-BHP - 203-KW 03/2007 - 03/2010 icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 272 HP'den 282 HP'ye, 300 Nm'den 337 Nm'ye.
| : cars |
| : BMW |
| : (03/2007 - 03/2010) |
| : X5 |
| : Petrol |
| : 3.0 - 272-BHP - 203-KW |
| : N52B30O1 |
| : SIEMENS MSV80 |
| : Kick panel, driver's side |
| OBD: ENU_MO_0202 |
| KESSV2: OBD |
| Kess V2 Protocollo: 202 |
| Protocollo KTAG: 990 |
| Processore KTAG: Boot(Tricore) |
| AUTOTUNER: Not yet supported - Check tool |
| X17: OBD/Boot |
| CMD: OBD Only |
| DPF: NO | EGR: NO |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: NO | EVAP: YES |
| HARDCUT: NO | POP & BANG: YES |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: YES |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
1
If push button ignition please follow these steps. 1. hold button for 4 seconds and release. Dash should illuminate, if it doesn?t press once more. Onnce dash illuminated proceed to read/write. When kess prompts to cycle ignition just ignore and select next. Without doing this will still read but fail on write