BMW X5 M50d 3.0 - 381-BHP - 284-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 381 | 420 | 462 |
| (Nm) | 740 | 800 | 880 |
BMW X5 M50d 3.0 - 381-BHP - 284-KW chiptuning ve Stage 1 ECU remap
BMW X5 M50d 3.0 - 381-BHP - 284-KW 07/2013 - 01/2017 icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 381 HP'den 420 HP'ye, 740 Nm'den 800 Nm'ye.
| : cars |
| : BMW |
| : (07/2013 - 01/2017) |
| : X5 M50d |
| : Diesel |
| : 3.0 - 381-BHP - 284-KW |
| : N57D30C |
| : BOSCH EDC17CP49 |
| : Opens both sides |
| : Kick panel, driver's side |
| KESSV2: OBD - ID/VR Only |
| Kess V2 Protocollo: 628 |
| Kess V2 Aiuto: ENU_L_EDC17_BMW_GPT |
| Protocollo KTAG: 671 |
| KTAG Aiuto: ENU_L_EDC17_BMW_GPT |
| Processore KTAG: Boot(Tricore) |
| AUTOTUNER: OBD/Boot/Bench |
| X17: OBD/Boot/Bench |
| CMD: OBD/Boot/Bench |
| DPF: YES | EGR: YES |
| ADBLUE: YES | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: YES | EVAP: NO |
| HARDCUT: YES | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: YES | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: NO |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: YES | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
To use Kess OBD it requires to be in subscription and constant internet connection
When writing OBD with Kess, ensure you have good internet connection, battery charger is connected, seatbelt plugged in, keys are inside the car, and the hazard lights are on. If kess fails to write first time its fine, just repeat the process again. If push button ignition, hold button for 4 seconds until dash illuminates. Without doing this will still read but fail on write