BMW B3 Cabriolet 3.3 - 300-BHP - 224-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 300 | 320 | 352 |
| (Nm) | 362 | 387 | 426 |
BMW B3 Cabriolet 3.3 - 300-BHP - 224-KW chiptuning ve Stage 1 ECU remap
BMW B3 Cabriolet 3.3 - 300-BHP - 224-KW 01/2000 - 01/2008 icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 300 HP'den 320 HP'ye, 362 Nm'den 387 Nm'ye.
| : cars |
| : BMW |
| : (01/2000 - 01/2008) |
| : B3 Cabriolet |
| : Petrol |
| : 3.3 - 300-BHP - 224-KW |
| : M54B30 |
| : SIEMENS MS43 |
| : Kick panel, driver's side |
| OBD: ENU_144300K202 |
| KESSV2: OBD |
| Kess V2 Protocollo: 59 |
| Processore KTAG: Not yet supported - Check tool |
| AUTOTUNER: Not yet supported - Check tool |
| X17: Not yet supported - Check tool |
| CMD: OBD/Boot/Bench |
| DPF: NO | EGR: NO |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: NO | EVAP: NO |
| HARDCUT: NO | POP & BANG: YES |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: YES |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
1
If push button ignition please follow these steps. 1. hold button for 4 seconds and release. Dash should illuminate, if it doesn?t press once more. Onnce dash illuminated proceed to read/write. When kess prompts to cycle ignition just ignore and select next. Without doing this will still read but fail on write