BMW 735i 3.6 - 272-BHP - 203-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 272 | 302 | 332 |
| (Nm) | 360 | 400 | 440 |
BMW 735i 3.6 - 272-BHP - 203-KW chiptuning ve Stage 1 ECU remap
BMW 735i 3.6 - 272-BHP - 203-KW 01/2002 - 01/2005 icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 272 HP'den 302 HP'ye, 360 Nm'den 400 Nm'ye.
| : cars |
| : BMW |
| : (01/2002 - 01/2005) |
| : 735i |
| : Petrol |
| : 3.6 - 272-BHP - 203-KW |
| : N62B36 |
| : BOSCH ME9.2 |
| : Kick panel, driver's side |
| OBD: ENU_L_ME9_BMW |
| KESSV2: OBD |
| Kess V2 Protocollo: 257 |
| Kess V2 Aiuto: ENU_L_BMSK_BMW |
| Protocollo KTAG: 19 |
| KTAG Aiuto: ENU_L_BMSK_BMW |
| Processore KTAG: Bdm(MPC5xx) |
| AUTOTUNER: Not yet supported - Check tool |
| X17: OBD/Boot |
| CMD: BDM |
| DPF: NO | EGR: NO |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: YES | EVAP: NO |
| HARDCUT: NO | POP & BANG: YES |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: YES |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
1
If push button ignition please follow these steps. 1. hold button for 4 seconds and release. Dash should illuminate, if it doesn?t press once more. Onnce dash illuminated proceed to read/write. When kess prompts to cycle ignition just ignore and select next. Without doing this will still read but fail on write