BMW 635d Cabriolet 3.0 - 285-BHP - 213-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 285 | 340 | 374 |
| (Nm) | 580 | 680 | 748 |
BMW 635d Cabriolet 3.0 - 285-BHP - 213-KW chiptuning ve Stage 1 ECU remap
BMW 635d Cabriolet 3.0 - 285-BHP - 213-KW 01/2007 - 01/2009 icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 285 HP'den 340 HP'ye, 580 Nm'den 680 Nm'ye.
| : cars |
| : BMW |
| : (01/2007 - 01/2009) |
| : 635d Cabriolet |
| : Diesel |
| : 3.0 - 285-BHP - 213-KW |
| : M57TU2D30TOP |
| : BOSCH EDC16CP35 |
| : Behind panel, near boot release |
| OBD: ENU_094300CAN1 |
| KESSV2: OBD |
| Kess V2 Protocollo: 164 |
| Kess V2 Aiuto: ENU_L_EDC16 |
| Protocollo KTAG: 100 |
| KTAG Aiuto: ENU_L_EDC16 |
| Processore KTAG: Bdm(MPC5xx) |
| AUTOTUNER: OBD Only |
| X17: OBD Only |
| CMD: BDM |
| DPF: YES | EGR: YES |
| ADBLUE: NO | TVA: YES |
| HOT START: NO | SAP: NO |
| DTC: YES | EVAP: NO |
| HARDCUT: YES | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: NO |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
1
If push button ignition please follow these steps. 1. hold button for 4 seconds and release. Dash should illuminate, if it doesn?t press once more. Onnce dash illuminated proceed to read/write. When kess prompts to cycle ignition just ignore and select next. Without doing this will still read but fail on write