BMW 540i 4.4 - 285-BHP - 213-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 285 | 310 | 341 |
| (Nm) | 440 | 479 | 527 |
BMW 540i 4.4 - 285-BHP - 213-KW chiptuning ve Stage 1 ECU remap
BMW 540i 4.4 - 285-BHP - 213-KW 01/1996 - 01/2004 icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 285 HP'den 310 HP'ye, 440 Nm'den 479 Nm'ye.
| : cars |
| : BMW |
| : (01/1996 - 01/2004) |
| : 540i |
| : Petrol |
| : 4.4 - 285-BHP - 213-KW |
| : M62B44TU |
| : BOSCH ME7.2 |
| : Opens one side |
| : Behind panel, near boot release |
| OBD: ENU_094300CAN1 |
| KESSV2: OBD |
| Kess V2 Protocollo: 148 |
| Kess V2 Aiuto: ENU_L_0604 |
| Protocollo KTAG: 604 |
| KTAG Aiuto: ENU_L_0604 |
| Processore KTAG: Boot(ST) |
| AUTOTUNER: Not yet supported - Check tool |
| X17: Not yet supported - Check tool |
| CMD: Not yet supported - Check tool |
| DPF: NO | EGR: NO |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: YES | EVAP: NO |
| HARDCUT: NO | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: YES |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
1
If push button ignition please follow these steps. 1. hold button for 4 seconds and release. Dash should illuminate, if it doesn?t press once more. Onnce dash illuminated proceed to read/write. When kess prompts to cycle ignition just ignore and select next. Without doing this will still read but fail on write