BMW 320d 2.0 - 150-BHP - 112-KW 01/2015 - Present Chiptuning

BMW 320d 2.0 - 150-BHP - 112-KW chiptuning
BMW 320d 2.0 - 150-BHP - 112-KW

Stage 1 Stage 2
(Hp) 150 197 217
(Nm) 330 420 462

BMW 320d 2.0 - 150-BHP - 112-KW chiptuning ve Stage 1 ECU remap

BMW 320d 2.0 - 150-BHP - 112-KW 01/2015 - Present icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.

Stage 1 150 HP'den 197 HP'ye, 330 Nm'den 420 Nm'ye.

: cars
: BMW
: (01/2015 - Present)
: 320d
: Diesel
: 2.0 - 150-BHP - 112-KW
: B47D20A
: BOSCH EDC17C50
: Sealed all around, remove one side
: Above pedals
OBD: ENU_MO_0628
KESSV2: OBD - VR/ID Only
Kess V2 Protocollo: 628
Kess V2 Aiuto: ENU_L_EDC17_BMW_GPT
Protocollo KTAG: 668
KTAG Aiuto: ENU_L_EDC17_BMW_GPT
Processore KTAG: Boot(Tricore)
AUTOTUNER: OBD/Boot/Bench
X17: OBD/Boot/Bench
CMD: OBD/Boot/Bench
DPF: YES EGR: YES
ADBLUE: YES TVA: YES
HOT START: NO SAP: NO
DTC: YES EVAP: NO
HARDCUT: YES POP & BANG: NO
EXAUST FLAP: NO GPF OFF: NO
TQM: YES SPEED LIMIT: YES
START STOP: YES LAMBDA: NO
MAF: NO BOOST SENSOR: NO
SPORT DISPLAY: YES SWIRL FLAP: NO
LAUNCH CONTROL: YES
1

To use Kess OBD it requires to be in subscription and constant internet connection

2

When writing OBD with Kess, ensure you have good internet connection, battery charger is connected, seatbelt plugged in, keys are inside the car, and the hazard lights are on. If kess fails to write first time its fine, just repeat the process again. If push button ignition, hold button for 4 seconds until dash illuminates. Without doing this will still read but fail on write