BMW 125i Coupe 3.0 - 218-BHP - 163-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 218 | 279 | 307 |
| (Nm) | 310 | 450 | 495 |
BMW 125i Coupe 3.0 - 218-BHP - 163-KW chiptuning ve Stage 1 ECU remap
BMW 125i Coupe 3.0 - 218-BHP - 163-KW 01/2007 - 01/2011 icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 218 HP'den 279 HP'ye, 310 Nm'den 450 Nm'ye.
| : cars |
| : BMW |
| : (01/2007 - 01/2011) |
| : 125i Coupe |
| : Petrol |
| : 3.0 - 218-BHP - 163-KW |
| : N52B30 |
| : BOSCH MEV1746 |
| : Sealed all around, remove one side |
| : Kick panel, driver's side |
| OBD: ENU_094300CAN1 |
| KESSV2: OBD |
| Kess V2 Protocollo: 254 |
| Kess V2 Aiuto: ENU_L_MEV17_BMW |
| Protocollo KTAG: 171 |
| KTAG Aiuto: ENU_L_MEV17_BMW |
| Processore KTAG: Boot(Tricore) |
| AUTOTUNER: Not yet supported - Check tool |
| X17: Not yet supported - Check tool |
| CMD: Boot Only |
| DPF: NO | EGR: NO |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: YES | EVAP: NO |
| HARDCUT: NO | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: NO |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: YES |
1
If push button ignition please follow these steps. 1. hold button for 4 seconds and release. Dash should illuminate, if it doesn?t press once more. Onnce dash illuminated proceed to read/write. When kess prompts to cycle ignition just ignore and select next. Without doing this will still read but fail on write