Volvo S40 2.0 TD - 150-BHP - 112-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 150 | 200 | 220 |
| (Nm) | 350 | 450 | 495 |
Volvo S40 2.0 TD - 150-BHP - 112-KW chiptuning ve Stage 1 ECU remap
Volvo S40 2.0 TD - 150-BHP - 112-KW 01/2007 - 01/2012 icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 150 HP'den 200 HP'ye, 350 Nm'den 450 Nm'ye.
Volvo S40 2.0 TD - 150-BHP - 112-KW hakkinda sik sorulan sorular
Volvo S40 2.0 TD - 150-BHP - 112-KW Stage 1 sonrasi kac HP ve Nm olur?
Stage 1 150 HP'den 200 HP'ye, 350 Nm'den 450 Nm'ye. Nihai degerler arac sagligi, yakit ve olcum kosullarina gore degisebilir.
Volvo S40 2.0 TD - 150-BHP - 112-KW hangi ECU ile calisir?
Volvo S40 2.0 TD - 150-BHP - 112-KW icin kayitli motor kontrol unitesi BOSCH EDC17CP22/CP48 olarak gorunmektedir.
Chiptuning uygulamasi oncesinde hangi kontroller yapilir?
Ariza kayitlari, mekanik durum ve ECU bilgisi kontrol edilir; uygun kalibrasyon arac bazinda belirlenir.
| : cars |
| : Volvo |
| : (01/2007 - 01/2012) |
| : S40 |
| : Diesel |
| : 2.0 TD - 150-BHP - 112-KW |
| : BOSCH EDC17CP22/CP48 |
| : Above pedals |
| OBD: ENU_MO_0638 |
| KESSV2: OBD - After K-Tag unlock |
| Kess V2 Protocollo: 638 |
| Kess V2 Aiuto: ENU_L_EDC17_VOLVO |
| Protocollo KTAG: 158 |
| KTAG Aiuto: ENU_L_EDC17_VOLVO |
| Processore KTAG: Boot(Tricore) |
| AUTOTUNER: Boot Only |
| X17: Boot Only |
| CMD: Boot Only |
| DPF: YES | EGR: YES |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: YES | EVAP: NO |
| HARDCUT: NO | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: YES | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: NO |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: YES |
| LAUNCH CONTROL: NO |
A canbus Uxxxx code can be displayed on the scantool after the remap relating to "Internal Control Module Software Incompatibility/Control Module, faulty software checksum ECM". Unfortunately there is no fix for this. This will not trigger a mil code nor trigger limp mode, its a background code to mark to Volvo the ECU has been remapped.