Volkswagen Polo Hatch 1.4 - 60-BHP - 45-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 60 | 69 | 76 |
| (Nm) | 116 | 133 | 146 |
Volkswagen Polo Hatch 1.4 - 60-BHP - 45-KW chiptuning ve Stage 1 ECU remap
Volkswagen Polo Hatch 1.4 - 60-BHP - 45-KW 01/1994 - 01/2000 icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 60 HP'den 69 HP'ye, 116 Nm'den 133 Nm'ye.
Volkswagen Polo Hatch 1.4 - 60-BHP - 45-KW hakkinda sik sorulan sorular
Volkswagen Polo Hatch 1.4 - 60-BHP - 45-KW Stage 1 sonrasi kac HP ve Nm olur?
Stage 1 60 HP'den 69 HP'ye, 116 Nm'den 133 Nm'ye. Nihai degerler arac sagligi, yakit ve olcum kosullarina gore degisebilir.
Volkswagen Polo Hatch 1.4 - 60-BHP - 45-KW hangi ECU ile calisir?
Volkswagen Polo Hatch 1.4 - 60-BHP - 45-KW icin kayitli motor kontrol unitesi BOSCH ME7.X4Mbit olarak gorunmektedir.
Chiptuning uygulamasi oncesinde hangi kontroller yapilir?
Ariza kayitlari, mekanik durum ve ECU bilgisi kontrol edilir; uygun kalibrasyon arac bazinda belirlenir.
| : cars |
| : Volkswagen |
| : (01/1994 - 01/2000) |
| : Polo Hatch |
| : Petrol |
| : 1.4 - 60-BHP - 45-KW |
| : AKK |
| : BOSCH ME7.X4Mbit |
| : Behind panel, in ashtray |
| OBD: ENU_094300CAN1 |
| KESSV2: OBD |
| Kess V2 Protocollo: 38 |
| Protocollo KTAG: 48 |
| Processore KTAG: Boot(ST) |
| AUTOTUNER: Not yet supported - Check tool |
| X17: OBD Only |
| CMD: OBD Only |
| DPF: NO | EGR: NO |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: YES |
| DTC: YES | EVAP: NO |
| HARDCUT: NO | POP & BANG: YES |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: YES |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
If Kess Family 38 does not work, try protocol 56
If vehicle wont read try removing dashboard fuse 11 in driver's door panel. Early throttle cable cars are chip change only