Suzuki SX4 1.5 - 98-BHP - 73-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 98 | 106 | 117 |
| (Nm) | 133 | 144 | 158 |
Suzuki SX4 1.5 - 98-BHP - 73-KW chiptuning ve Stage 1 ECU remap
Suzuki SX4 1.5 - 98-BHP - 73-KW 01/2006 - 01/2014 icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 98 HP'den 106 HP'ye, 133 Nm'den 144 Nm'ye.
Suzuki SX4 1.5 - 98-BHP - 73-KW hakkinda sik sorulan sorular
Suzuki SX4 1.5 - 98-BHP - 73-KW Stage 1 sonrasi kac HP ve Nm olur?
Stage 1 98 HP'den 106 HP'ye, 133 Nm'den 144 Nm'ye. Nihai degerler arac sagligi, yakit ve olcum kosullarina gore degisebilir.
Suzuki SX4 1.5 - 98-BHP - 73-KW hangi ECU ile calisir?
Suzuki SX4 1.5 - 98-BHP - 73-KW icin kayitli motor kontrol unitesi DENSO 062J0 olarak gorunmektedir.
Chiptuning uygulamasi oncesinde hangi kontroller yapilir?
Ariza kayitlari, mekanik durum ve ECU bilgisi kontrol edilir; uygun kalibrasyon arac bazinda belirlenir.
| : cars |
| : Suzuki |
| : (01/2006 - 01/2014) |
| : SX4 |
| : Petrol |
| : 1.5 - 98-BHP - 73-KW |
| : DENSO 062J0 |
| : Near bonnet release |
| KESSV2: Not yet supported - Check tool |
| Kess V2 Aiuto: ENU_L_0262 |
| Protocollo KTAG: 262 |
| KTAG Aiuto: ENU_L_0262 |
| Processore KTAG: Jtag(Renesas) |
| AUTOTUNER: Not yet supported - Check tool |
| X17: Not yet supported - Check tool |
| CMD: Not yet supported - Check tool |
| DPF: NO | EGR: NO |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: NO | EVAP: NO |
| HARDCUT: NO | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: NO |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
1
Clean surface of probe points well, if not reading/writing clean again