SEAT Cordoba 1.9 TDI - 130-BHP - 97-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 130 | 165 | 182 |
| (Nm) | 310 | 385 | 424 |
SEAT Cordoba 1.9 TDI - 130-BHP - 97-KW chiptuning ve Stage 1 ECU remap
SEAT Cordoba 1.9 TDI - 130-BHP - 97-KW 01/2003 - 01/2004 icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 130 HP'den 165 HP'ye, 310 Nm'den 385 Nm'ye.
SEAT Cordoba 1.9 TDI - 130-BHP - 97-KW hakkinda sik sorulan sorular
SEAT Cordoba 1.9 TDI - 130-BHP - 97-KW Stage 1 sonrasi kac HP ve Nm olur?
Stage 1 130 HP'den 165 HP'ye, 310 Nm'den 385 Nm'ye. Nihai degerler arac sagligi, yakit ve olcum kosullarina gore degisebilir.
SEAT Cordoba 1.9 TDI - 130-BHP - 97-KW hangi ECU ile calisir?
SEAT Cordoba 1.9 TDI - 130-BHP - 97-KW icin kayitli motor kontrol unitesi BOSCH EDC15P+ olarak gorunmektedir.
Chiptuning uygulamasi oncesinde hangi kontroller yapilir?
Ariza kayitlari, mekanik durum ve ECU bilgisi kontrol edilir; uygun kalibrasyon arac bazinda belirlenir.
| : cars |
| : SEAT |
| : (01/2003 - 01/2004) |
| : Cordoba |
| : Diesel |
| : 1.9 TDI - 130-BHP - 97-KW |
| : ASZ |
| : BOSCH EDC15P+ |
| OBD: ENU_144300K206 |
| KESSV2: OBD |
| Kess V2 Protocollo: 10 |
| Processore KTAG: Not yet supported - Check tool |
| AUTOTUNER: Not yet supported - Check tool |
| X17: Not yet supported - Check tool |
| CMD: OBD Only |
| DPF: NO | EGR: YES |
| ADBLUE: NO | TVA: NO |
| HOT START: YES | SAP: NO |
| DTC: YES | EVAP: NO |
| HARDCUT: YES | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: NO |
| MAF: YES | BOOST SENSOR: YES |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: YES |
1
If no read use VAG cable144300206 direct into ECU