Renault Megane 1.5 dCi - 90-BHP - 67-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 90 | 115 | 127 |
| (Nm) | 220 | 260 | 286 |
Renault Megane 1.5 dCi - 90-BHP - 67-KW chiptuning ve Stage 1 ECU remap
Renault Megane 1.5 dCi - 90-BHP - 67-KW 01/2012 - 01/2013 icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 90 HP'den 115 HP'ye, 220 Nm'den 260 Nm'ye.
Renault Megane 1.5 dCi - 90-BHP - 67-KW hakkinda sik sorulan sorular
Renault Megane 1.5 dCi - 90-BHP - 67-KW Stage 1 sonrasi kac HP ve Nm olur?
Stage 1 90 HP'den 115 HP'ye, 220 Nm'den 260 Nm'ye. Nihai degerler arac sagligi, yakit ve olcum kosullarina gore degisebilir.
Renault Megane 1.5 dCi - 90-BHP - 67-KW hangi ECU ile calisir?
Renault Megane 1.5 dCi - 90-BHP - 67-KW icin kayitli motor kontrol unitesi DELPHI DCM3.4 olarak gorunmektedir.
Chiptuning uygulamasi oncesinde hangi kontroller yapilir?
Ariza kayitlari, mekanik durum ve ECU bilgisi kontrol edilir; uygun kalibrasyon arac bazinda belirlenir.
| : cars |
| : Renault |
| : (01/2012 - 01/2013) |
| : Megane |
| : Diesel |
| : 1.5 dCi - 90-BHP - 67-KW |
| : DELPHI DCM3.4 |
| : Opens one side |
| : Behind panel, below radio |
| OBD: ENU_094300CAN1 |
| KESSV2: OBD |
| Kess V2 Protocollo: 270 |
| Kess V2 Aiuto: ENU_L_0258 |
| Protocollo KTAG: 258 |
| KTAG Aiuto: ENU_L_0258 |
| Processore KTAG: Jtag(Renesas) |
| AUTOTUNER: OBD Only |
| X17: OBD Only |
| CMD: OBD/Boot/Bench |
| DPF: YES | EGR: YES |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: YES | EVAP: NO |
| HARDCUT: NO | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: NO |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
Clean surface of probe points well, if not reading/writing clean again
On keyless, put card in slot, into first gear and push button for 10 seconds until 'Remove card' comes up on dash