Peugeot Traveller 2.0 BlueHDi - 180-BHP - 134-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 180 | 200 | 220 |
| (Nm) | 400 | 450 | 495 |
Peugeot Traveller 2.0 BlueHDi - 180-BHP - 134-KW chiptuning ve Stage 1 ECU remap
Peugeot Traveller 2.0 BlueHDi - 180-BHP - 134-KW 01/2016 - Present icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 180 HP'den 200 HP'ye, 400 Nm'den 450 Nm'ye.
Peugeot Traveller 2.0 BlueHDi - 180-BHP - 134-KW hakkinda sik sorulan sorular
Peugeot Traveller 2.0 BlueHDi - 180-BHP - 134-KW Stage 1 sonrasi kac HP ve Nm olur?
Stage 1 180 HP'den 200 HP'ye, 400 Nm'den 450 Nm'ye. Nihai degerler arac sagligi, yakit ve olcum kosullarina gore degisebilir.
Peugeot Traveller 2.0 BlueHDi - 180-BHP - 134-KW hangi ECU ile calisir?
Peugeot Traveller 2.0 BlueHDi - 180-BHP - 134-KW icin kayitli motor kontrol unitesi DELPHI DCM6.2A olarak gorunmektedir.
Chiptuning uygulamasi oncesinde hangi kontroller yapilir?
Ariza kayitlari, mekanik durum ve ECU bilgisi kontrol edilir; uygun kalibrasyon arac bazinda belirlenir.
| : cars |
| : Peugeot |
| : (01/2016 - Present) |
| : Traveller |
| : Diesel |
| : 2.0 BlueHDi - 180-BHP - 134-KW |
| : DELPHI DCM6.2A |
| : Sealed all around, remove one side |
| OBD: ENU_144300KCAN |
| KESSV2: OBD - VR/ID Only |
| Kess V2 Protocollo: 575 |
| Kess V2 Aiuto: ENU_L_0947 |
| Protocollo KTAG: 947 |
| KTAG Aiuto: ENU_L_0947 |
| Processore KTAG: Jtag(SPC) |
| AUTOTUNER: OBD/Boot |
| X17: OBD/Boot |
| CMD: OBD/Boot |
| DPF: YES | EGR: YES |
| ADBLUE: YES | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: YES | EVAP: NO |
| HARDCUT: NO | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: YES | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: NO |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |