Peugeot 407 SW 2.0 HDi - 136-BHP - 101-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 136 | 166 | 183 |
| (Nm) | 320 | 380 | 418 |
Peugeot 407 SW 2.0 HDi - 136-BHP - 101-KW chiptuning ve Stage 1 ECU remap
Peugeot 407 SW 2.0 HDi - 136-BHP - 101-KW 01/2004 - 01/2008 icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 136 HP'den 166 HP'ye, 320 Nm'den 380 Nm'ye.
Peugeot 407 SW 2.0 HDi - 136-BHP - 101-KW hakkinda sik sorulan sorular
Peugeot 407 SW 2.0 HDi - 136-BHP - 101-KW Stage 1 sonrasi kac HP ve Nm olur?
Stage 1 136 HP'den 166 HP'ye, 320 Nm'den 380 Nm'ye. Nihai degerler arac sagligi, yakit ve olcum kosullarina gore degisebilir.
Peugeot 407 SW 2.0 HDi - 136-BHP - 101-KW hangi ECU ile calisir?
Peugeot 407 SW 2.0 HDi - 136-BHP - 101-KW icin kayitli motor kontrol unitesi SIEMENS SID803 olarak gorunmektedir.
Chiptuning uygulamasi oncesinde hangi kontroller yapilir?
Ariza kayitlari, mekanik durum ve ECU bilgisi kontrol edilir; uygun kalibrasyon arac bazinda belirlenir.
| : cars |
| : Peugeot |
| : (01/2004 - 01/2008) |
| : 407 SW |
| : Diesel |
| : 2.0 HDi - 136-BHP - 101-KW |
| : RHR(DW10BTED4) |
| : SIEMENS SID803 |
| : Opens one side |
| : Inside centre console |
| OBD: ENU_094300CAN1 |
| KESSV2: OBD |
| Kess V2 Protocollo: 47 |
| Kess V2 Aiuto: ENU_L_SID_803_PSA |
| Protocollo KTAG: 32 |
| KTAG Aiuto: ENU_L_SID_803_PSA |
| Processore KTAG: Bdm(MPC5xx) |
| AUTOTUNER: Not yet supported - Check tool |
| X17: Not yet supported - Check tool |
| CMD: OBD/Boot/Bench |
| DPF: YES | EGR: YES |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: YES | EVAP: NO |
| HARDCUT: NO | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: NO |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
If BDM adaptors does not read make direct soldered connection
Requires 5WS4 xxx xx-x number off ECU label mentioned on upload, as well as KESS ID, to source original file