Opel Corsa 1.0 - 60-BHP - 45-KW
Estimated %30 more power and %40 more torque
| Parameters | Original | Stage 1 | Stage 2 |
|---|---|---|---|
| Power (Hp) | 60 | 65 | 72 |
| Torque (Nm) | 88 | 95 | 105 |
Opel Corsa 1.0 - 60-BHP - 45-KW chiptuning ve Stage 1 ECU remap
Opel Corsa 1.0 - 60-BHP - 45-KW 08/2003 - 07/2006 icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 60 HP'den 65 HP'ye, 88 Nm'den 95 Nm'ye.
Opel Corsa 1.0 - 60-BHP - 45-KW hakkinda sik sorulan sorular
Opel Corsa 1.0 - 60-BHP - 45-KW Stage 1 sonrasi kac HP ve Nm olur?
Stage 1 60 HP'den 65 HP'ye, 88 Nm'den 95 Nm'ye. Nihai degerler arac sagligi, yakit ve olcum kosullarina gore degisebilir.
Opel Corsa 1.0 - 60-BHP - 45-KW hangi ECU ile calisir?
Opel Corsa 1.0 - 60-BHP - 45-KW icin kayitli motor kontrol unitesi DELCO MULTEC olarak gorunmektedir.
Chiptuning uygulamasi oncesinde hangi kontroller yapilir?
Ariza kayitlari, mekanik durum ve ECU bilgisi kontrol edilir; uygun kalibrasyon arac bazinda belirlenir.
Vehicle Information
| Vehicle: cars |
| Brand: Opel |
| Year: (08/2003 - 07/2006) |
| Model: Corsa |
| Fuel: Petrol |
| Engine: 1.0 - 60-BHP - 45-KW |
| Chip Tuning: X10YFL |
Ecu Information
| Engine Ecu: DELCO MULTEC |
| Reading Devices: Below heater controls |
Reading Devices
| KESSV2: OBD |
| Kess V2 Protocollo: 26 |
| Processore KTAG: Not yet supported - Check tool |
| AUTOTUNER: Not yet supported - Check tool |
| X17: Not yet supported - Check tool |
| CMD: Not yet supported - Check tool |
Available Solutions
| DPF: NO | EGR: NO |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: NO | EVAP: NO |
| HARDCUT: NO | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: YES |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |