Nissan Navara 2.5 dCi - 144-BHP - 107-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 144 | 188 | 207 |
| (Nm) | 403 | 450 | 495 |
Nissan Navara 2.5 dCi - 144-BHP - 107-KW chiptuning ve Stage 1 ECU remap
Nissan Navara 2.5 dCi - 144-BHP - 107-KW 01/2010 - 01/2015 icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 144 HP'den 188 HP'ye, 403 Nm'den 450 Nm'ye.
Nissan Navara 2.5 dCi - 144-BHP - 107-KW hakkinda sik sorulan sorular
Nissan Navara 2.5 dCi - 144-BHP - 107-KW Stage 1 sonrasi kac HP ve Nm olur?
Stage 1 144 HP'den 188 HP'ye, 403 Nm'den 450 Nm'ye. Nihai degerler arac sagligi, yakit ve olcum kosullarina gore degisebilir.
Nissan Navara 2.5 dCi - 144-BHP - 107-KW hangi ECU ile calisir?
Nissan Navara 2.5 dCi - 144-BHP - 107-KW icin kayitli motor kontrol unitesi DENSO SH7058 olarak gorunmektedir.
Chiptuning uygulamasi oncesinde hangi kontroller yapilir?
Ariza kayitlari, mekanik durum ve ECU bilgisi kontrol edilir; uygun kalibrasyon arac bazinda belirlenir.
| : cars |
| : Nissan |
| : (01/2010 - 01/2015) |
| : Navara |
| : Diesel |
| : 2.5 dCi - 144-BHP - 107-KW |
| : DENSO SH7058 |
| : Opens one side |
| : Behind centre console, near pedals |
| OBD: ENU_094300CAN1 |
| KESSV2: OBD |
| Kess V2 Protocollo: 482 |
| Kess V2 Aiuto: ENU_L_0314 |
| Protocollo KTAG: 314 |
| KTAG Aiuto: ENU_L_0314 |
| Processore KTAG: Jtag(Renesas) |
| AUTOTUNER: Not yet supported - Check tool |
| X17: Not yet supported - Check tool |
| CMD: OBD/Boot/Bench |
| DPF: NO | EGR: YES |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: NO | EVAP: NO |
| HARDCUT: NO | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: NO |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
1
ECU Out: Ensure read write pads are clean