Nissan Fairlady Z 3.5 - 313-BHP - 233-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 313 | 335 | 369 |
| (Nm) | 353 | 375 | 413 |
Nissan Fairlady Z 3.5 - 313-BHP - 233-KW chiptuning ve Stage 1 ECU remap
Nissan Fairlady Z 3.5 - 313-BHP - 233-KW 09/2005 - 11/2008 icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 313 HP'den 335 HP'ye, 353 Nm'den 375 Nm'ye.
Nissan Fairlady Z 3.5 - 313-BHP - 233-KW hakkinda sik sorulan sorular
Nissan Fairlady Z 3.5 - 313-BHP - 233-KW Stage 1 sonrasi kac HP ve Nm olur?
Stage 1 313 HP'den 335 HP'ye, 353 Nm'den 375 Nm'ye. Nihai degerler arac sagligi, yakit ve olcum kosullarina gore degisebilir.
Nissan Fairlady Z 3.5 - 313-BHP - 233-KW hangi ECU ile calisir?
Nissan Fairlady Z 3.5 - 313-BHP - 233-KW icin kayitli motor kontrol unitesi HITACHI MEC100-xxx olarak gorunmektedir.
Chiptuning uygulamasi oncesinde hangi kontroller yapilir?
Ariza kayitlari, mekanik durum ve ECU bilgisi kontrol edilir; uygun kalibrasyon arac bazinda belirlenir.
| : cars |
| : Nissan |
| : (09/2005 - 11/2008) |
| : Fairlady Z |
| : Petrol |
| : 3.5 - 313-BHP - 233-KW |
| : VQ35HR |
| : HITACHI MEC100-xxx |
| : Above pedals |
| KESSV2: OBD |
| Kess V2 Protocollo: 694 |
| Kess V2 Aiuto: ENU_L_0502 |
| Protocollo KTAG: 502 |
| KTAG Aiuto: ENU_L_0502 |
| Processore KTAG: Jtag(Renesas) |
| AUTOTUNER: Not yet supported - Check tool |
| X17: Not yet supported - Check tool |
| CMD: Not yet supported - Check tool |
| DPF: NO | EGR: NO |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: NO | EVAP: NO |
| HARDCUT: NO | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: YES |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
1
High risk of ECU damage