Mercedes-Benz E280 3.0 CDI - 190-BHP - 142-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 190 | 260 | 286 |
| (Nm) | 440 | 570 | 627 |
Mercedes-Benz E280 3.0 CDI - 190-BHP - 142-KW chiptuning ve Stage 1 ECU remap
Mercedes-Benz E280 3.0 CDI - 190-BHP - 142-KW 01/2006 - 01/2009 icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 190 HP'den 260 HP'ye, 440 Nm'den 570 Nm'ye.
Mercedes-Benz E280 3.0 CDI - 190-BHP - 142-KW hakkinda sik sorulan sorular
Mercedes-Benz E280 3.0 CDI - 190-BHP - 142-KW Stage 1 sonrasi kac HP ve Nm olur?
Stage 1 190 HP'den 260 HP'ye, 440 Nm'den 570 Nm'ye. Nihai degerler arac sagligi, yakit ve olcum kosullarina gore degisebilir.
Mercedes-Benz E280 3.0 CDI - 190-BHP - 142-KW hangi ECU ile calisir?
Mercedes-Benz E280 3.0 CDI - 190-BHP - 142-KW icin kayitli motor kontrol unitesi BOSCH EDC16CP31 olarak gorunmektedir.
Chiptuning uygulamasi oncesinde hangi kontroller yapilir?
Ariza kayitlari, mekanik durum ve ECU bilgisi kontrol edilir; uygun kalibrasyon arac bazinda belirlenir.
| : cars |
| : Mercedes-Benz |
| : (01/2006 - 01/2009) |
| : E280 |
| : Diesel |
| : 3.0 CDI - 190-BHP - 142-KW |
| : OM642DE30LAR |
| : BOSCH EDC16CP31 |
| : Above pedals |
| OBD: ENU_MO_0069 |
| KESSV2: OBD |
| Kess V2 Protocollo: 69 |
| Kess V2 Aiuto: ENU_L_EDC16 |
| Protocollo KTAG: 71 |
| KTAG Aiuto: ENU_L_EDC16 |
| Processore KTAG: Bdm(MPC5xx) |
| AUTOTUNER: Not yet supported - Check tool |
| X17: OBD/Boot |
| CMD: OBD/Boot/Bench |
| DPF: YES | EGR: YES |
| ADBLUE: NO | TVA: YES |
| HOT START: NO | SAP: NO |
| DTC: YES | EVAP: NO |
| HARDCUT: NO | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: NO |
| MAF: NO | BOOST SENSOR: YES |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
Turn ignition on fully to second stage
DPF and EGR deletes require KTag read unless using CMD VR