Land Rover Range Rover 3.6 TDV8 - 268-BHP - 200-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 268 | 310 | 341 |
| (Nm) | 640 | 750 | 825 |
Land Rover Range Rover 3.6 TDV8 - 268-BHP - 200-KW chiptuning ve Stage 1 ECU remap
Land Rover Range Rover 3.6 TDV8 - 268-BHP - 200-KW 06/2009 - 09/2012 icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 268 HP'den 310 HP'ye, 640 Nm'den 750 Nm'ye.
Land Rover Range Rover 3.6 TDV8 - 268-BHP - 200-KW hakkinda sik sorulan sorular
Land Rover Range Rover 3.6 TDV8 - 268-BHP - 200-KW Stage 1 sonrasi kac HP ve Nm olur?
Stage 1 268 HP'den 310 HP'ye, 640 Nm'den 750 Nm'ye. Nihai degerler arac sagligi, yakit ve olcum kosullarina gore degisebilir.
Land Rover Range Rover 3.6 TDV8 - 268-BHP - 200-KW hangi ECU ile calisir?
Land Rover Range Rover 3.6 TDV8 - 268-BHP - 200-KW icin kayitli motor kontrol unitesi SIEMENS SID201-203-204 olarak gorunmektedir.
Chiptuning uygulamasi oncesinde hangi kontroller yapilir?
Ariza kayitlari, mekanik durum ve ECU bilgisi kontrol edilir; uygun kalibrasyon arac bazinda belirlenir.
| : cars |
| : Land Rover |
| : (06/2009 - 09/2012) |
| : Range Rover |
| : Diesel |
| : 3.6 TDV8 - 268-BHP - 200-KW |
| : 368DT |
| : SIEMENS SID201-203-204 |
| : Opens one side |
| : Behind panel, side of steering wheel |
| OBD: ENU_094300CAN1 |
| KESSV2: OBD |
| Kess V2 Protocollo: 87 |
| Kess V2 Aiuto: ENU_L_SID_201_204 |
| Protocollo KTAG: 98 |
| KTAG Aiuto: ENU_L_SID_201_204 |
| Processore KTAG: Bdm(MPC5xx) |
| AUTOTUNER: Not yet supported - Check tool |
| X17: OBD/Boot |
| CMD: OBD/Boot/Bench |
| DPF: YES | EGR: YES |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: YES | EVAP: NO |
| HARDCUT: NO | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: NO |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |