Jeep Liberty 2.8 VCRD - 163-BHP - 122-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 163 | 200 | 220 |
| (Nm) | 410 | 520 | 572 |
Jeep Liberty 2.8 VCRD - 163-BHP - 122-KW chiptuning ve Stage 1 ECU remap
Jeep Liberty 2.8 VCRD - 163-BHP - 122-KW 01/2002 - 01/2012 icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 163 HP'den 200 HP'ye, 410 Nm'den 520 Nm'ye.
Jeep Liberty 2.8 VCRD - 163-BHP - 122-KW hakkinda sik sorulan sorular
Jeep Liberty 2.8 VCRD - 163-BHP - 122-KW Stage 1 sonrasi kac HP ve Nm olur?
Stage 1 163 HP'den 200 HP'ye, 410 Nm'den 520 Nm'ye. Nihai degerler arac sagligi, yakit ve olcum kosullarina gore degisebilir.
Jeep Liberty 2.8 VCRD - 163-BHP - 122-KW hangi ECU ile calisir?
Jeep Liberty 2.8 VCRD - 163-BHP - 122-KW icin kayitli motor kontrol unitesi BOSCH EDC16C31 olarak gorunmektedir.
Chiptuning uygulamasi oncesinde hangi kontroller yapilir?
Ariza kayitlari, mekanik durum ve ECU bilgisi kontrol edilir; uygun kalibrasyon arac bazinda belirlenir.
| : cars |
| : Jeep |
| : (01/2002 - 01/2012) |
| : Liberty |
| : Diesel |
| : 2.8 VCRD - 163-BHP - 122-KW |
| : BOSCH EDC16C31 |
| : Above pedals |
| OBD: ENU_094300CAN1 |
| KESSV2: OBD |
| Kess V2 Protocollo: 63 |
| Kess V2 Aiuto: ENU_L_EDC16 |
| Protocollo KTAG: 14 |
| KTAG Aiuto: ENU_L_EDC16 |
| Processore KTAG: Bdm(MPC5xx) |
| AUTOTUNER: Not yet supported - Check tool |
| X17: Not yet supported - Check tool |
| CMD: OBD/Boot/Bench |
| DPF: YES | EGR: YES |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: YES | EVAP: NO |
| HARDCUT: NO | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: NO |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
1
On K-TAG take special care to align probes correctly, otherwise will damage ECU