Ford Kuga 2.5 - 200-BHP - 149-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 200 | 260 | 286 |
| (Nm) | 320 | 400 | 440 |
Ford Kuga 2.5 - 200-BHP - 149-KW chiptuning ve Stage 1 ECU remap
Ford Kuga 2.5 - 200-BHP - 149-KW 01/2008 - 01/2012 icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 200 HP'den 260 HP'ye, 320 Nm'den 400 Nm'ye.
Ford Kuga 2.5 - 200-BHP - 149-KW hakkinda sik sorulan sorular
Ford Kuga 2.5 - 200-BHP - 149-KW Stage 1 sonrasi kac HP ve Nm olur?
Stage 1 200 HP'den 260 HP'ye, 320 Nm'den 400 Nm'ye. Nihai degerler arac sagligi, yakit ve olcum kosullarina gore degisebilir.
Ford Kuga 2.5 - 200-BHP - 149-KW hangi ECU ile calisir?
Ford Kuga 2.5 - 200-BHP - 149-KW icin kayitli motor kontrol unitesi BOSCH ME9 olarak gorunmektedir.
Chiptuning uygulamasi oncesinde hangi kontroller yapilir?
Ariza kayitlari, mekanik durum ve ECU bilgisi kontrol edilir; uygun kalibrasyon arac bazinda belirlenir.
| : cars |
| : Ford |
| : (01/2008 - 01/2012) |
| : Kuga |
| : Petrol |
| : 2.5 - 200-BHP - 149-KW |
| : HYDB |
| : BOSCH ME9 |
| : Opens one side |
| : Side of steering wheel |
| OBD: ENU_094300CAN1 |
| KESSV2: OBD - VR/ID Only |
| Kess V2 Protocollo: 272 |
| Kess V2 Aiuto: ENU_L_ME9+_FORD |
| Protocollo KTAG: 76 |
| KTAG Aiuto: ENU_L_ME9+_FORD |
| Processore KTAG: Bdm(MPC5xx) |
| AUTOTUNER: Not yet supported - Check tool |
| X17: Not yet supported - Check tool |
| CMD: BDM |
| DPF: NO | EGR: NO |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: YES | EVAP: NO |
| HARDCUT: NO | POP & BANG: YES |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: YES |
| MAF: YES | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
Take care opening ECU
Always requires KTAG read to obtain correct original file. OBD2 write function can be used once KTAG read taken