Ford Endeavour 3.2 TDCi - 200-BHP - 149-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 200 | 230 | 253 |
| (Nm) | 470 | 560 | 616 |
Ford Endeavour 3.2 TDCi - 200-BHP - 149-KW chiptuning ve Stage 1 ECU remap
Ford Endeavour 3.2 TDCi - 200-BHP - 149-KW 01/2015 - Present icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 200 HP'den 230 HP'ye, 470 Nm'den 560 Nm'ye.
Ford Endeavour 3.2 TDCi - 200-BHP - 149-KW hakkinda sik sorulan sorular
Ford Endeavour 3.2 TDCi - 200-BHP - 149-KW Stage 1 sonrasi kac HP ve Nm olur?
Stage 1 200 HP'den 230 HP'ye, 470 Nm'den 560 Nm'ye. Nihai degerler arac sagligi, yakit ve olcum kosullarina gore degisebilir.
Ford Endeavour 3.2 TDCi - 200-BHP - 149-KW hangi ECU ile calisir?
Ford Endeavour 3.2 TDCi - 200-BHP - 149-KW icin kayitli motor kontrol unitesi SIEMENS Continental SID209 olarak gorunmektedir.
Chiptuning uygulamasi oncesinde hangi kontroller yapilir?
Ariza kayitlari, mekanik durum ve ECU bilgisi kontrol edilir; uygun kalibrasyon arac bazinda belirlenir.
| : cars |
| : Ford |
| : (01/2015 - Present) |
| : Endeavour |
| : Diesel |
| : 3.2 TDCi - 200-BHP - 149-KW |
| : SIEMENS Continental SID209 |
| : Behind panel on right hand side of steering wheel |
| OBD: ENU_094300CAN1 |
| KESSV2: OBD |
| Kess V2 Protocollo: 397 |
| Protocollo KTAG: 803 |
| Processore KTAG: Bdm(MPC5xx) |
| AUTOTUNER: Not yet supported - Check tool |
| X17: Not yet supported - Check tool |
| CMD: OBD |
| DPF: YES | EGR: YES |
| ADBLUE: YES | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: YES | EVAP: NO |
| HARDCUT: NO | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: NO |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
1
On K-TAG take special care to align probes correctly, otherwise will damage ECU