Ford Endeavour 3.0 TDCi - 156-BHP - 116-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 156 | 195 | 215 |
| (Nm) | 380 | 460 | 506 |
Ford Endeavour 3.0 TDCi - 156-BHP - 116-KW chiptuning ve Stage 1 ECU remap
Ford Endeavour 3.0 TDCi - 156-BHP - 116-KW 01/2003 - Present icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 156 HP'den 195 HP'ye, 380 Nm'den 460 Nm'ye.
Ford Endeavour 3.0 TDCi - 156-BHP - 116-KW hakkinda sik sorulan sorular
Ford Endeavour 3.0 TDCi - 156-BHP - 116-KW Stage 1 sonrasi kac HP ve Nm olur?
Stage 1 156 HP'den 195 HP'ye, 380 Nm'den 460 Nm'ye. Nihai degerler arac sagligi, yakit ve olcum kosullarina gore degisebilir.
Ford Endeavour 3.0 TDCi - 156-BHP - 116-KW hangi ECU ile calisir?
Ford Endeavour 3.0 TDCi - 156-BHP - 116-KW icin kayitli motor kontrol unitesi BOSCH EDC16C7-7 olarak gorunmektedir.
Chiptuning uygulamasi oncesinde hangi kontroller yapilir?
Ariza kayitlari, mekanik durum ve ECU bilgisi kontrol edilir; uygun kalibrasyon arac bazinda belirlenir.
| : cars |
| : Ford |
| : (01/2003 - Present) |
| : Endeavour |
| : Diesel |
| : 3.0 TDCi - 156-BHP - 116-KW |
| : BOSCH EDC16C7-7 |
| : Behind panel on right hand side of steering wheel |
| OBD: ENU_094300CAN1 |
| KESSV2: OBD |
| Kess V2 Protocollo: 289 |
| Kess V2 Aiuto: ENU_L_EDC16 |
| Protocollo KTAG: 11 |
| KTAG Aiuto: ENU_L_EDC16 |
| Processore KTAG: Bdm(MPC5xx) |
| AUTOTUNER: Not yet supported - Check tool |
| X17: Not yet supported - Check tool |
| DPF: YES | EGR: YES |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: YES | EVAP: NO |
| HARDCUT: NO | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: NO |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
1
On K-TAG take special care to align probes correctly, otherwise will damage ECU