Ford Edge Vignale 2.0 TDCi -180-BHP - 134-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 180 | 200 | 220 |
| (Nm) | 400 | 450 | 495 |
Ford Edge Vignale 2.0 TDCi -180-BHP - 134-KW chiptuning ve Stage 1 ECU remap
Ford Edge Vignale 2.0 TDCi -180-BHP - 134-KW 01/2016 - 01/2018 icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 180 HP'den 200 HP'ye, 400 Nm'den 450 Nm'ye.
Ford Edge Vignale 2.0 TDCi -180-BHP - 134-KW hakkinda sik sorulan sorular
Ford Edge Vignale 2.0 TDCi -180-BHP - 134-KW Stage 1 sonrasi kac HP ve Nm olur?
Stage 1 180 HP'den 200 HP'ye, 400 Nm'den 450 Nm'ye. Nihai degerler arac sagligi, yakit ve olcum kosullarina gore degisebilir.
Ford Edge Vignale 2.0 TDCi -180-BHP - 134-KW hangi ECU ile calisir?
Ford Edge Vignale 2.0 TDCi -180-BHP - 134-KW icin kayitli motor kontrol unitesi DELPHI DCM6.1 olarak gorunmektedir.
Chiptuning uygulamasi oncesinde hangi kontroller yapilir?
Ariza kayitlari, mekanik durum ve ECU bilgisi kontrol edilir; uygun kalibrasyon arac bazinda belirlenir.
| : cars |
| : Ford |
| : (01/2016 - 01/2018) |
| : Edge Vignale |
| : Diesel |
| : 2.0 TDCi -180-BHP - 134-KW |
| : DELPHI DCM6.1 |
| : Sealed all around, remove one side |
| : Above pedals |
| OBD: ENU_144300KCAN |
| KESSV2: OBD Only |
| Kess V2 Protocollo: 536 |
| Protocollo KTAG: 1118 |
| Processore KTAG: Boot(Tricore) |
| AUTOTUNER: OBD Only |
| X17: OBD Only |
| CMD: OBD Only |
| DPF: YES | EGR: YES |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: YES | EVAP: NO |
| HARDCUT: NO | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: YES | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: NO |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
If the ECU goes into sleep mode after 1-2 minutes, go into menu in car and set AUTO ENGINE OFF, this will allow reading and writing to be carried out