Fiat 500X 1.6 - 110-BHP - 82-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 110 | 135 | 149 |
| (Nm) | 320 | 380 | 418 |
Fiat 500X 1.6 - 110-BHP - 82-KW chiptuning ve Stage 1 ECU remap
Fiat 500X 1.6 - 110-BHP - 82-KW 01/2015 - Present icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 110 HP'den 135 HP'ye, 320 Nm'den 380 Nm'ye.
Fiat 500X 1.6 - 110-BHP - 82-KW hakkinda sik sorulan sorular
Fiat 500X 1.6 - 110-BHP - 82-KW Stage 1 sonrasi kac HP ve Nm olur?
Stage 1 110 HP'den 135 HP'ye, 320 Nm'den 380 Nm'ye. Nihai degerler arac sagligi, yakit ve olcum kosullarina gore degisebilir.
Fiat 500X 1.6 - 110-BHP - 82-KW hangi ECU ile calisir?
Fiat 500X 1.6 - 110-BHP - 82-KW icin kayitli motor kontrol unitesi MAGNETI MARELLI 9GF olarak gorunmektedir.
Chiptuning uygulamasi oncesinde hangi kontroller yapilir?
Ariza kayitlari, mekanik durum ve ECU bilgisi kontrol edilir; uygun kalibrasyon arac bazinda belirlenir.
| : cars |
| : Fiat |
| : (01/2015 - Present) |
| : 500X |
| : Petrol |
| : 1.6 - 110-BHP - 82-KW |
| : 55263842 |
| : MAGNETI MARELLI 9GF |
| : Requires both sides of ECU opening, board flip |
| : Above pedals |
| OBD: ENU_094300CAN1 |
| KESSV2: OBD |
| Kess V2 Protocollo: 479 |
| Kess V2 Aiuto: ENU_L_0726 |
| Protocollo KTAG: 726 |
| KTAG Aiuto: ENU_L_0726 |
| Processore KTAG: Jtag(SPC) |
| AUTOTUNER: Not yet supported - Check tool |
| X17: OBD/Boot |
| CMD: OBD Only |
| DPF: NO | EGR: NO |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: NO | EVAP: NO |
| HARDCUT: NO | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: NO |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
If throttle and clutch adaption does not work with tuning tool, it will require a main dealer tool (seen issues on 2017MY onwards)