BMW 728i 2.8 - 193-BHP - 144-KW 01/1994 - 01/1998 Chiptuning

BMW 728i 2.8 - 193-BHP - 144-KW chiptuning
BMW 728i 2.8 - 193-BHP - 144-KW

Stage 1 Stage 2
(Hp) 193 206 227
(Nm) 245 270 297

BMW 728i 2.8 - 193-BHP - 144-KW chiptuning ve Stage 1 ECU remap

BMW 728i 2.8 - 193-BHP - 144-KW 01/1994 - 01/1998 icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.

Stage 1 193 HP'den 206 HP'ye, 245 Nm'den 270 Nm'ye.

BMW 728i 2.8 - 193-BHP - 144-KW hakkinda sik sorulan sorular

BMW 728i 2.8 - 193-BHP - 144-KW Stage 1 sonrasi kac HP ve Nm olur?

Stage 1 193 HP'den 206 HP'ye, 245 Nm'den 270 Nm'ye. Nihai degerler arac sagligi, yakit ve olcum kosullarina gore degisebilir.

BMW 728i 2.8 - 193-BHP - 144-KW hangi ECU ile calisir?

BMW 728i 2.8 - 193-BHP - 144-KW icin kayitli motor kontrol unitesi SIEMENS MS41.0 olarak gorunmektedir.

Chiptuning uygulamasi oncesinde hangi kontroller yapilir?

Ariza kayitlari, mekanik durum ve ECU bilgisi kontrol edilir; uygun kalibrasyon arac bazinda belirlenir.

: cars
: BMW
: (01/1994 - 01/1998)
: 728i
: Petrol
: 2.8 - 193-BHP - 144-KW
: M52B28
: SIEMENS MS41.0
: Behind panel, below heater controls
OBD: ENU_144300K202
KESSV2: OBD
Kess V2 Protocollo: 145
Processore KTAG: Not yet supported - Check tool
AUTOTUNER: Not yet supported - Check tool
X17: Not yet supported - Check tool
CMD: Not yet supported - Check tool
DPF: NO EGR: NO
ADBLUE: NO TVA: NO
HOT START: NO SAP: NO
DTC: NO EVAP: NO
HARDCUT: NO POP & BANG: NO
EXAUST FLAP: NO GPF OFF: NO
TQM: NO SPEED LIMIT: YES
START STOP: NO LAMBDA: NO
MAF: NO BOOST SENSOR: NO
SPORT DISPLAY: NO SWIRL FLAP: NO
LAUNCH CONTROL: NO
1

If push button ignition please follow these steps. 1. hold button for 4 seconds and release. Dash should illuminate, if it doesn?t press once more. Onnce dash illuminated proceed to read/write. When kess prompts to cycle ignition just ignore and select next. Without doing this will still read but fail on write

Ara WhatsApp Teklif Al