BMW 435d Coupe 3.0 - 313-BHP - 233-KW
| Stage 1 | Stage 2 | ||
|---|---|---|---|
| (Hp) | 313 | 360 | 396 |
| (Nm) | 630 | 700 | 770 |
BMW 435d Coupe 3.0 - 313-BHP - 233-KW chiptuning ve Stage 1 ECU remap
BMW 435d Coupe 3.0 - 313-BHP - 233-KW 01/2017 - Present icin chiptuning, Stage 1 performans yazilimi ve ECU remap verileri; guc, tork, ECU modeli ve desteklenen cozumlerle birlikte sunulur.
Stage 1 313 HP'den 360 HP'ye, 630 Nm'den 700 Nm'ye.
BMW 435d Coupe 3.0 - 313-BHP - 233-KW hakkinda sik sorulan sorular
BMW 435d Coupe 3.0 - 313-BHP - 233-KW Stage 1 sonrasi kac HP ve Nm olur?
Stage 1 313 HP'den 360 HP'ye, 630 Nm'den 700 Nm'ye. Nihai degerler arac sagligi, yakit ve olcum kosullarina gore degisebilir.
BMW 435d Coupe 3.0 - 313-BHP - 233-KW hangi ECU ile calisir?
BMW 435d Coupe 3.0 - 313-BHP - 233-KW icin kayitli motor kontrol unitesi BOSCH EDC17CP49 olarak gorunmektedir.
Chiptuning uygulamasi oncesinde hangi kontroller yapilir?
Ariza kayitlari, mekanik durum ve ECU bilgisi kontrol edilir; uygun kalibrasyon arac bazinda belirlenir.
| : cars |
| : BMW |
| : (01/2017 - Present) |
| : 435d Coupe |
| : Diesel |
| : 3.0 - 313-BHP - 233-KW |
| : N57D30B |
| : BOSCH EDC17CP49 |
| : Sealed all around, remove one side |
| : Above pedals |
| OBD: ENU_MO_0628 |
| KESSV2: OBD - ID/VR Only |
| Kess V2 Protocollo: 628 |
| Kess V2 Aiuto: ENU_L_EDC17_BMW_GPT |
| Protocollo KTAG: 671 |
| KTAG Aiuto: ENU_L_EDC17_BMW_GPT |
| Processore KTAG: Boot(Tricore) |
| AUTOTUNER: OBD/Boot/Bench |
| X17: OBD/Boot/Bench |
| CMD: OBD/Boot/Bench |
| DPF: YES | EGR: YES |
| ADBLUE: YES | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: YES | EVAP: NO |
| HARDCUT: YES | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: YES | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: NO |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: YES | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
To use Kess OBD it requires to be in subscription and constant internet connection
When writing OBD with Kess, ensure you have good internet connection, battery charger is connected, seatbelt plugged in, keys are inside the car, and the hazard lights are on. If kess fails to write first time its fine, just repeat the process again. If push button ignition, hold button for 4 seconds until dash illuminates. Without doing this will still read but fail on write